You might look at a trumpet and think, “It only has three valves—what could go wrong?”
Despite the relative simplicity and durability of trumpets, trombones and other brass instruments, many issues can pop up and threaten to derail your ensemble’s rehearsal, concert or field performance.
As the band director, you’re the first responder for any student who has an instrument emergency. So it’s important to know how to handle common repairs in the band room, backstage and on the sideline.
In our new repair series video, master technician John Blythe shares essential quick fixes for handling the most common trumpet repairs. With a little valve oil and some elbow grease, you can handle many of the common issues for trumpets and trombones. These aren’t permanent fixes, but they will keep students playing through practices, performances and competitions.
Check out the video above and read the article to learn more!
Tips for How to Repair a Trumpet
Trumpet and trombone repairs can range from pretty simple to quite challenging, depending on the nature of the issue. Most common problems are straightforward enough to manage, especially with the right tools and knowledge.
It’s worth investing in a repair kit that includes the tools and supplies needed to make quick fixes to brass instruments. You should utilize a repair kit that includes synthetic materials with a long shelf life, as you may not be addressing repairs on a daily basis. Here are a couple of options:
Once you have the necessary equipment, you’re ready to explore the most common repairs for trumpet. Always have a fully functioning and well-tuned instrument nearby for comparison.
Replacing a water key cork
The water key (or spit valve) cork on a trumpet or trombone is a small but essential component that helps prevent air leaks and allows moisture to be expelled from the instrument. Over time, water key corks can wear out, causing leaks and affecting the instrument’s playability.
Tools needed:
- Hot air gun
- Poker
- Scraper
- Pad slick
- Smooth jaw pliers
- Replacement cork
How to replace a water key cork:
- Use the hot air gun to warm the backside of the water key cup and soften the glue.
- Remove the old cork with a poker and clean out any remaining glue with a scraper.
- Select a replacement cork from the kit and make sure it fits properly before peeling off the adhesive backing.
- Place the cork into the cup, press firmly and use a pad slick to level it.
- Adjust the water key alignment with pliers if necessary, and ensure a proper seal using a feeler gauge.
Replacing a water key spring
The water key spring on a trumpet returns the water key to its closed position after being pressed.
Tools needed:
- Screwdriver
- Smooth jaw pliers
- Wire cutters
- Replacement spring
- Painter’s tape or electrical tape
How to replace a water key spring:
- To protect the instrument’s finish during this repair, wrap the area below the water key with painter’s tape or electrical tape.
- Remove the water key using a screwdriver and be careful to retain the screw.
- Select a replacement spring from the kit and confirm that it matches the original.
- Use the hollow, horseshoe-shaped tool included in your repair kit to hold the spring in place while you reattach the water key.
- Adjust and, using wire cutters, trim the spring as needed, so that it fits securely and functions properly.
Unsticking a stuck valve
It’s important to keep trumpet valves clean through regular maintenance and valve oil application. Issues with valves can make the instrument essentially unplayable. With some basic troubleshooting, stuck valves can usually be resolved.
Tools needed:
- Valve oil
- Nylon or rubber hammer
How to unstick a stuck valve:
- Remove the valve and check for nicks, dents, obstructions or damage to the casing that might be causing the piston to stick. Once the valves are removed, wash and clean each valve to ensure proper valve action and apply oil before reinstalling. If the valve is not easily removed, or if you see visible damage to the outside of the valve casing, do not force it or stick a drumstick or other foreign object in the valve casing from the bottom to drive the piston out. Doing this may cause more serious damage. If the valve is stuck to this degree you’ll need to visit your local Music & Arts for repair.
- If the 2nd valve is sticking or hanging up it may be knocked out of alignment. You can check this by gently pulling or applying pressure to the 2nd slide from side to side, to see if the valve starts to work properly.
- Use penetrating oil and a heat gun if the slides are stuck, and apply gentle tapping with a nylon hammer if necessary.
Removing a stuck mouthpiece
A trumpet or trombone mouthpiece can become stuck due to several factors, including insertion force, dirt and debris, temperature changes, improper storage, impact or being dropped. It’s a common issue that’s easy to fix.
Tools needed:
- Mouthpiece puller
- Penetrating oil
- Heat gun
- Mallet
How to remove a stuck mouthpiece:
- Apply a drop of penetrating oil around the mouthpiece receiver.
- Use the mouthpiece puller to grip and extract the mouthpiece, applying heat if necessary to loosen it.
- Use gentle tapping with a mallet to aid in the removal process.
Replacing valve felts
Valve felts on trumpets facilitate the smooth operation of the valves, providing cushioning and helping them maintain proper alignment. Worn or missing valve felts can affect the instrument’s playability.
Tools needed:
- Replacement felts and washers
How to replace a valve felt:
- Remove the valve cap and finger button.
- Replace the felts and washers with those of matching thickness from the kit. Use the instruction guide in the kit when replacing all valve felts or washers to ensure proper valve alignment.
- Reassemble the valve components and confirm smooth and quiet operation.
Turn to the Pros at Music & Arts
Remember that regular maintenance and prompt repairs by an experienced technician are essential to the performance and longevity of brass instruments. If you need help handling a repair, contact the Music & Arts repair team. We’d be happy to assist!